Getting the Most Out of Your Heat Pump

Heat pumps, like other hvac systems,  require require the proper operating techniques to run it's best. The combination of caring for your heat pump in the right way and setting up annual maintenance with your local hvac company can result in a system that is 10-25% more efficient than a neglected one.

Here are some tips to  ensure maximum efficiency between professional maintenance:

• Use the “auto” fan setting. This allows the thermostat to control the fan and achieve optimal performance. It is also easier on the unit than the constant turning it up and turning it down. 
• Change the filter once per quarter or as needed.  A new filter will ensure proper airflow and put less strain on the compressor. A new filter is much cheaper than repairing the unit.
• Clean the outdoor coils periodically. If dirt appears on the outside, that’s your cue to hose down the outdoor coils. You should also keep plants trimmed back so they don’t obstruct airflow.

At least once or twice per year, you should schedule preventative maintenance . During a routine maintenance check a professional HVAC service tech will do the following tasks:

• Inspect the system for dirt or obstructions and clean it out
• Check for adequate airflow
• Check the refrigerant charge and fix any leaks
• Verify that electric connections are clean and tight
• Lubricate the blower motor
• Inspect belts for wear and tightness
• Ensure the thermostat is operating correctly
• Diagnose leaky ducts and seal them if needed

Each of these checks will keep your heat pump in it's best condition for years to come, helping you avoid expensive repairs and delaying replacements. 

A Ductless Mini-Split System: The Many Benefits Of A Heat Pump

Whether your entire house - or perhaps just an area that has been added on - is lacking in ductwork, an excellent solution for air conditioning is the ductless mini-split system. This style of system incorporates an outside unit with an indoor unit placed in the wall. Both are attached directly in a more efficient fashion than a window air conditioning unit. Here's some of the benefits of installing a ductless mini-split system inside your Bay Area home.

• Ideal for zoning: Cooling down certain areas individually is achievable with zoning systems, contributing to energy savings and customised comfort. With as many as 4 indoor air controlling units for every outside unit, you could achieve as much as four zones in your house having a ductless mini-split system.

• Simple to install: The hook-up requires merely a three-inch hole inside the wall for connecting the inside and outside units. There's no ductwork necessary, and also the outdoor unit may be placed up to Fifty feet from your indoor evaporator, so that you can install the outdoor unit inside of a shady, very discreet spot.

• Efficient: Central air conditioning units have to overcome the inefficiencies of duc-twork, and window ac units are especially challenging to seal off. By using an intrinsically efficient ductless mini-split system and closing the space around the hook-up, you could get the very best cooling capacity for your buck.

• Silent operation: Because the blower is within your immediate area, the circulation of air is likely to be louder compared to a central A/C system, however ductless mini-splits are a lot quieter than window air conditioning units. The humming compressor is outdoors and the unit can be set up to function on low speed for the most quiet operation attainable.

• Flexible home decor choices: You could attach the indoor unit flush to a drop ceiling, hang it from your ceiling, or install it into the wall. Having a standard depth of just 7 inches, as well as a streamlined, modern-looking jacket, ductless mini-split systems don't take away from from the appearance of your house.

To learn more pertaining to ductless mini-split systems, please don't hesitate to get in touch with Sandim Heating & Air Conditioning in the South San Francisco Bay Area today

Make Sure You Plan Routine Maintenance For Your Heat Pump Before It’s Too Late

Once the weather conditions begins to cool, it’s time for you to schedule a heat pump servicing. You should prepare your devices some time before wintertime arrives for a number of reasons.

Primary advantages of regular routine maintenance include:

• Conserving money: Yearly tune-ups are considerably less expensive than the repair or replacement service. Your system will be more cost-effective, which lowers your power bills.

• Make repairs or improvements: Have an experienced technician evaluate the condition of each and every element of the system and recommend any needed fixes or upgrades prior to winter. Cold temperatures cuts down on the efficiency of the heat pump. That’s because your internal coils need to start generating heat to add to the heat in the air, so it’s essential that they’re clean and in good shape.

Schedule a heat pump servicing by using a certified professional who'll perform a complete, comprehensive job of:

• Testing airflow: In accordance with Energy Star, over fifty percent of the heat pumps within the U.S. have substantial issues with low airflow and leaking ducts. Certified technicians will test ventilation with state-of-the-art instruments to uncover and correct any problems.

• Sizing and fixing ducts: Defective ducts makes it possible for as much as 30 % of one's treated air to leave before it gets to the intended area. Therefore, issues with your ductwork really need to be identified so you comprehend any performance problems and prepare for repairs should they be needed.

• Cleaning and replacing of filters: This should be done every 2 to 6 months, but particularly at the start of the heating time of year.

• Cleaning your system thoroughly: Every single component part ought to be properly cleaned out and cleared of all the dirt. That also includes the entire evaporator coil, condensate tray, outdoor coils, supply and returning registers, blower fan rotor blades as well as the space around the equipment.

• Examining the motor and belts: The inner parts should really be examined to ensure they are in very good repair with plenty amount of lubrication where it's required.

• Testing electrical and protective controls:  All of the controls and electrical wiring ought to be tested to ensure they are working properly and accurately.

To schedule heat pump maintenance for your home, contact your local Sandium heat pump specialist.  We provide expert HVAC service to the South Bay Area and surrounding areas.

Allergic Reactions at Home? You Need a Whole House Air Purifier

Throughout the Spring months, those of us with allergy symptoms are dreading the itchy eyes, dripping noses, coughing and sneezing that allergy season brings.

There's only so much that you can do to guard yourself when away from the home; but indoors, you could choose a whole home air cleaner so you know that you and your loved ones can at least breathe easy in your house. Pollen is among one of many allergens there are. Recent reports have revealed that as much as 15% of folks have dust allergies but as many as 50% of asthma affected individuals are allergic to dust and around 30% of individuals who are afflicted by allergies are allergic to pet dander.

An entire house air purifier is very effective at filtering out dust, pollen, pet dander, bacteria as well as other pollutants - up to 98% of airborne allergens are filtered with a whole house air cleaner. A central air filtering system is set up in your current a / c or central heating system and dependant upon the model, could be effective in homes as much as 5000 sq . ft .

Do I Need a Whole Home Air Cleaner?

That will depend on who within your family would gain from cleaner air and where you spend the vast majority of of your time. The IQAir Perfect 16 is the almost all effective whole house air purifier and is also very effective at cleansing the air in homes up to 5000 square feet however some central air purifiers are only effective for houses around 2000 sq ft. If several members of the family have allergies, a whole house air purifier would be effective at substantially decreasing allergens but if just one person in your house has allergies and spends most of the time in the family room, a portable home air purifier might be all that's necessary. This could then be transferred to the bedroom at nighttime, if it's needed.

You may improve the quality of air in your home and allow your lungs a rest by using a whole house air purifier. Though allergy medications work well at eliminating the signs of your allergies, they just don't eliminate the irritants that actually cause the problem in the first place. By reduction of the allergens in your house by having an home air cleaner, you have one less thing to fret about this coming spring!

Are you aware that the quality of air in your house may very well be more irritating than the air quality outdoors? The environment in your home may very well be helping to make your allergies more irritating! Whole home air purifiers successfully remove up to 99% of allergens within the air to bring you relief from your allergies.

Easy Home Electricity Savings By Duct Sealing and Insulation

Most people are searching for ways to "go green" nowadays. From water bottles made from plants, to old tires becoming development materials, businesses everywhere are marketing "green". All of this talk of carbon footprints and global warming has successfully made its way into the everyday vernacular and left homeowners evaluating their own impact.

Their are a number of gimmicks around to maximize your electricity efficiency and reduced your power bills, but most of them just pray on an increasingly energy conscious public. Doing work in the weatherization field I frequently get questioned for advice on cutting back on utilities and making a home more energy-efficient. I usually respond by telling the homeowner to adhere to some basic steps: shut off lights that are not being used, and then get a programmable thermostat assuming they don't curently have one.

If they need to do more however, I let them know that one of the greatest returns on investment for virtually any house is raising the efficiency of their forced-air heating and air conditioning system. Typical cooling and heating systems may be over 20 % inefficient. These inefficiencies signify that for each and every five dollars in paying to heat or cool your home, a dollar has been thrown away trying to condition your attic or unfinished basement. For those who spend $2000 dollars per year on heating and air conditioning utilities it's a waste of $400! That's money you're wasting and greenhouse gases which are being produced without real gain. Give it some thought, the less energy-efficient your house, the more you undoubtedly pay to pollute our environment.

By sealing and insulating your ducts you could dramatically boost your systems efficiency. Improperly sealed ducts can dump your conditioned air (air that's the humidity and temperature you prefer) back into the non-conditioned areas the ducts are running through. It's efficiency lost! Additionally, non-sealed return ducts will in fact pull the non-conditioned air surrounding them into your ducts causing your system to have to work much harder to maintain your house for the desired humidity and temperature. Certain house appliances for example hot water heaters and furnaces may also emit dangerous gases like deadly carbon monoxide which could then be drawn in to the ducts through leaky return ducts.

Not insulating your ducts is actually as bad as not insulating your home. Not only does insulating your ducts reduce condensation which can cause moisture problems and toxic mold, but it also assists in keeping the air within the duct the proper temperature. Consider this, if your ducts are carrying 72 degree air yet the ducts are the same temperature as a basement, say 50 degrees, this is a 20 degree temperature battle taking place from your furnace till the air makes its way out into your livable areas of your home.

Duct sealing and insulation is inexpensive as a do-it-yourself project. When you understand what to find and where you should go, you may easily do-it-yourself throughout the course of a few weekends. You don't have to shut off your furnace or air conditioning system to insulate and seal the ducts. Obviously, I normally recommend getting a professional get it done if you aren't very technically inclined, however this is among the safer DIY projects. In either case with all the expense of energy increasing this can be a great project for you to do and also to realize an incredibly quick return-on-investment.

Insulation to Keep Us Warm — Not Warm the Planet

I've been quite vocal in regards to a real problem with some of our most typical insulation materials: that they're manufactured by using blowing agents that have highly concentrated greenhouse gases.

All extruded polystyrene (XPS) and almost all closed-cell spray polyurethane foams (SPF) are produced with HFC (hydrofluorocarbon) blowing agents which have global warming potentials (GWPs) many hundreds of times higher than that of carbon dioxide. (Sorry for contaminating this column with the amount of acronyms!)


Insulation: great news, not so great news

Insulation materials help our houses save energy and, by doing this, they decrease the burning of fossil fuels and the release of greenhouse gases.

However, if the insulation material itself is made using a very-high-GWP blowing agent which could eventually escape from the insulation, adding a great deal of insulation might actually be a very bad thing from the viewpoint of mitigating climate change. All that was detailed in my article several years ago, "Avoiding the Global Warming Effects of Insulation" and, in depth, in the EBN feature write-up on the exact same topic.


OK for ozone, detrimental for the climate

With XPS, the blowing agent HFC-134a has a GWP of 1,430, which means that it's 1,430 times as potent as carbon dioxide (that is defined as having a GWP of 1). Almost all closed-cell SPF is produced with the blowing agent HFC-245fa, which has a GWP of 1,030.

Relative to global warming, all these blowing agents aren't as bad as the CFCs that have been used originally, however they are as bad as the HCFCs (hydrochlorocfluorcarbons) that have been adopted as second-generation blowing agents. (Both HFCs and HFOs are believed to be completely safe for the ozone, which is the reason CFCs and HCFCs happen to be eliminated.)



Blowing agents: the next generation

Anyhow, given all of this, I've been closely following the breakthroughs by industry in developing alternatives which are neither ozone depleters nor considerable greenhouse gases.

A couple of years ago, it appeared that the primary candidates were HFOs (hydrofluoroolefins), and Honeywell revealed the development of this sort of product in 2011. And also, it was just reported a couple weeks ago that Whirlpool, the nation's biggest home appliance company (with such brands as Maytag, Amana, Jenn-Air, and KitchenAid, as well as Whirlpool), was shifting to a different HFO blowing agent for the polyurethane insulation in all of its refrigerators.

Whirlpool is going to be utilizing the new Solstice Liquid Blowing Agent created by Honeywell, one of the nation's 3 makers of blowing agents (as well as DuPont and Arkema). Solstice HFO has zero ozone depletion potential and a GWP of just 4.7 to 7.0-similar to that of the numerous hydrocarbon blowing agents found in expanded polystyrene and polyisocyanurate - and insignificant relative to global warming.


Performance enhancement an additional benefit

Further more, Solstice HFO will increase the R-value of the insulation components just a little. Compared to HFC-245fa, this HFO yields insulation with 2% higher R-value, and in contrast to hydrocarbon blowing agents it provides an 8% to 10% enchancment, determined by Honeywell.

While the improvement is fantastic, it's not instant. The HFO has recently received its approvals from the united states government, and this will require sometime to ramp up manufacturing and switch refrigerator manufacturers to the new foam. Whirlpool plans to get started on integrating the new blowing agents into its refrigerators in end of the 2013.


Spray-foam producers not so quick to adopt HFOs

But what about the closed-cell SPF insulation that's widely used to insulate buildings?

SPF manufacturers will likely be exchanging the HFC-245fa with HFO . but it's uncertain exactly when that could happen. Rick Duncan, the technical director at the Spray Polyurethane Foam Alliance (SPFA), the trade association serving the SPF industry, explained to me that some SPF manufacturers ("system houses") are performing field tests with the new HFO blowing agents, and not all of them. (At least one manufacturer, Icynene, also produces a water-blown, medium-density foam, MD-R-200, which insulates to R-5.2 per inch and is known as both an open-cell and closed-cell product in the Icynene web-site; just about all other water-blown SPF products are thought to be discontinued.)

Unlike in 2003 when federal rules required a change from HCFC to HFC blowing agents as a consequence of ozone depletion fears, there are no similar regulations demanding a switch from HFCs to HFOs.


It's up to us

Plus the conversion process requires time and is also really expensive - about 12 months and a minimum of $100,000, says Duncan. With the building industry still in an market recession, companies aren't planning to invest a lot of extra money on product advancement.

Duncan feels, however, that after a new life-cycle assessment (LCA) report on SPF is released that SPFA is now finalizing, consumers will start requesting for lower-GWP foam and manufacturers will answer by making it. From an environmental perspective, open-cell SPF (which doesn't contain HFC blowing agents) has just 1/20th the global warming effects of closed-cell SPF.


A lot less action in the XPS camp

I wasn't capable of getting nearly as much information and facts from the extruded polystyrene industry about when the HFC-134a may be substituted with a lower-GWP blowing agent and whether there's a gaseous type of HFO which could work with that industry. (While a liquefied blowing agent is utilized in developing SPF, a gaseous blowing agent is essential for XPS.)

Jan McKinnon, the senior communications director at Dow Building Solutions (manufacturer of Dow Styrofoam XPS), states that this company is seeking solutions to decrease its greenhouse gas pollution levels. "Since the kick off of our new formulation in 2010 [converting from HCFC-142b to HFC-134a], we keep looking at reducing our blowing agent global warming potential, and we have an proactive process in position to lower it by 15%," she informed me. She said that they are actively evaluating alternative blowing agents for XPS, "but a good number of of these technologies are still in their infancy."


Not a terrific time to invest in products

Each of the SPF and XPS markets already have experienced a couple of significant changes: from CFC to HCFC blowing agents and then from HCFC to HFC blowing agents.

With a weakened constructing economy and depressed sales and profits of constructing supplies, excitement for a 3rd significant conversion has been very little. However I feel that you will see a increasing demand to make products with very little affect on global climate change as is possible - and in case this year's heat and drought continue on, that demand may possibly increase.

Let's hope so.

Facts to Know About Heat Pumps

You do not have to be a HVAC professional to understand how heat pumps function. If you have one then you should know how it works. 

Heat pumps work like regular systems during the AC season. Keep that in mind when you have one installed in your home.

With a heat pump you should not turn your AC system off. Only using the cooling system on a part-time basis can cost you money in energy bills and repair costs to the system. If you turn it off when you are out of the house, your home will soak up the heat that is there and this will make cooling in the late afternoon/evening much harder to accomplish. You will save $ when you let the thermostat  decide when cooling is required for your home.

The heat pumps in your home will provide warm air during the time of the year when you need heat. The pump will run for long durations of time. They are designed to operate in this manner.

When it is the coldest outside, frost will build up in the outdoor coil of the heat pump. This will begin a cycle of defrosting. When the cycle is taking place, the outdoor fan will stop running and the compressor will make a humming sound.

You will notice that cool air is coming from the registers. You may also hear a whooshing sound and will see water runoff or steam coming from the unit. These functions are all normal and are related to the cycle of defrosting.

During this defrosting cycle, allow it to do its thing. Do not make any changes to the thermostat. The cycle will take anywhere from a couple of minutes to 10.  The time depends on the amount of ice build up on the coil. Once the cycle is finished, the unit will return to the heating function.

If you believe that the heat pump is not working properly, you should call in a professional to evaluate the system. Do not attempt to repair it on your own- you could do more harm than good.

Do not constantly adjust your thermostat. It is best to find a comfortable temperature and then leave it at that setting. There will be more wear and tear on the system if you fiddle with the temp all time. As well, it can be anything but budget savvy to do this.

What You Didn't Know About Your HVAC and Mold Issues

Certain kinds of mildew in your personal property can trigger powerful serious side effects and can even cause harm to the nervous system in little kids or older folks. Not only that, substantial mold issues are incredibly costly to eradicate and can lower the overall worth of one's residence. Most men and women do not know which actions they can take to avoid the development of all these harmful bacteria in their HVAC systems. If you have discovered mold developing on your HVAC air vents then you want to consider taking safety measures straight away. Contacting a nearby HVAC expert is an excellent initial move to evaluate your circumstance and to swiftly remedy the issue.

What molds are and where you will find them

Molds are forms of living fungi. They develop in an organic setting. Small contaminants of molds are located just about everywhere in the interior and outdoor atmosphere. Molds assist in eliminating inactive elements, and can be observed developing in the dirt, on refrigerated goods, vegetation and many other objects.

Fungi are also incredibly prevalent in structures and private properties. Mold requires humidness in order to expand. Inside, mold advancement is mostly discovered in any place where there are high ranges of moisture content, such as cellars and bathrooms. All of these molds create incredibly tiny cellular material known as spore. Spores are effortlessly dispersed by means of air flow. Spores are also distributed by bugs and moving water.

One thing you need to understand is that there will constantly be mold existing in buildings as spores and portions of mildew material. The occurrence of living fungi is very standard. However, you must not allow mold to develop and flourish inside of any type of building. When this takes place, your amount of direct subjection will maximize, and thus boost the threat of possible wellness complications. Development supplies, domestic products and household furniture might also be harmed. Mold has to feed in order to live, and it's completely satisfied ingesting your house if you permit it to.

Health issues caused by mold

Tons of health complications can arise from subjection to mold. Some of them include hypersensitive sickness, damaging side effects, disease, and poisonous outcomes. When individuals are susceptible to illness from molds, they will show indications such as nasal irritability or blockage, scratchy throat, coughing, exposed skin breakouts, or dried out eye balls. Those who have serious allergic reactions to molds might have additional severe side effects, such as high temperature indicators or respiration challenges.

If you have pre-existing serious health issues or health defense challenges then you are more probable to catch disease from specific molds, germs and microorganisms. The harmful consequences of these types of molds are not properly comprehended by everybody, and they are presently a debatable subject matter between medical professionals.

The simplest way to check for mold

Interior mold development will generally be observed with the eyes or through smell. Most of the time if noticeable mold progression is found, testing is not required. Testing for mildew in the atmosphere can be costly. It should also only be completed by knowledgeable specialists. Feel free to examine a mold issue; just never analyze it without proper support.

When you search for obvious mold advancement it might appear to be similar to material types and vary in color. It frequently shows up as a discoloration or wooly expansion on furnishings or structure supplies such as partitions, rooftops, or something built out of hardwood. Search for indications of moisture or deterioration caused by wetness. All these include leakages, staining, and wetness build-up.

Getting rid of mold

Mold must be cleansed as quickly as it shows up. Anybody who decided to clean up mold should be sure they will have no allergic reactions to it. More compact locations of mold must be washed with a cleaning agent mixed with water or a industrial fungus cleaner. Protective gear needs to always be utilized throughout the cleanup process. The flushed location should then be completely dried out. Toss out all of the cloth materials that were used during the process as well.

Remember, having mold in your HVAC system does not imply that you are incapable of keeping up cleanliness of your own house. It basically indicates that there are sections of substantial dampness or moisture content content that are generating suitable reproduction bases for mole spores. All these resources of water mixed with areas of particle and debris build-up inside your ducts are serious trouble spots and have to be treated very quickly.

You must take the initial action to have your HVAC system skillfully cleansed. If the moisture origin is not resolved, you are going to have an additional issue in the near future. Do not be afraid to contact a local qualified specialist and have the examine your ducts for the main source of the problem.

 

Is DIY HVAC a Good Idea OR a Bad Idea?

Is do-it-yourself HVAC a good idea? It is very important to understand that DIY HVAC is in some cases a great idea, but in most cases, such projects can be daunting and are not for everyone. Let's look at what is involved in a few of a lot of these projects and then decide if you are up to the task.

Air Conditioner or Heat Pump unit replacement: This usually involves removing the existing outdoor condenser or heat pump and replacing it with a new unit. That sounds easy, right? Well, it is, if you know what you are doing and have the proper tools to do it. To remove the existing unit, you, by law, must evacuate the existing refrigerant from the system. This requires two things that most of us do not have, an evacuation pump that removes and stores the refrigerant and a CFC Refrigerant Certification. Ouch!! Now what do you do?

Because of a lot of these restrictions and rightfully so, as the handling of refrigerant chemicals can be dangerous because of extreme temperatures and high pressures that can harm humans if subjected to either, and the ever present concern of releasing the CFC related chemicals into our atmosphere that are illegal to expel, it would appear that you are not going to be able to do this project yourself. But all is not lost.

What you can do, is purchase your equipment from a reputable company that specializes in making HVAC equipment available to homeowners. This will be the most important step you will take. In many cases the money that you will save will be so dramatic that you will wonder exactly why you have not done this before.

Next, you can prepare the site location new equipment. This may include grading an area outside of your own and installing a new pad, either prefab or poured concrete. You can also run and secure new refrigerant lines set between the outdoor unit and the coil. Because you are not directly handling refrigerants, you are allowed and most likely capable of doing this portion of the job. Depending on building and electrical codes in your area, you may be able to run electrical connections and have those ready for qualified professional connection or possibly make a lot of these connections yourself. You can purchase and install a new thermostat if needed as well. As you can see, there is plenty that you can do yourself that will save you money in the end.

When the time is right, hiring a local skilled professional to complete the project is the best option and may be the only option. But remember that the money you have saved by purchasing your own equipment and the pre-work that you have done yourself will pay big dividends.

5 Tips To Winterize Your Home

1. Tune-up the heating system

As you probably know from the previous winters, approximately 30% of the household expenses during the cold season stem from the heating system. On a side note, based on the region you live in and the resource you utilize for heating - mainly electricity, gas and oil - this expenditure could easily double. Therefore, it is highly advisable to test their functionality, check for faulty devices, change filter systems and perform any other maintenance tasks to ensure they are in top working condition.

2. Check the insulation on the ductwork

Without properly insulating the ductwork that runs all across your house, you risk wasting about 60% of the heated air by trying to maintain a comfortable temperature indoors. If you're tired of wasting so much money, then it would be a good idea to insulate the ducts, particularly in the cold areas of one's house such as the basement, attic or crawlspaces. In case you observe pinches and gasps, then utilize a metal backed tape to fix them. Even though regular duct tape can do the trick in most cases, it won't be as efficient if you have an older ductwork. Don't forget to wrap up the pipes that run outside your house as well.

3. Button up the home windows

Ideally, winterizing the windows would imply replacing the current home windows with resilient storm house windows as their extra layer of protection works great on keeping the warmth inside the house. However, if you can't afford to spend money on new home windows, there is still a viable solution for your personal situation, namely insulated blinds. While many homeowners don't give them too much credit, in reality the insulated blinds have the potential of doubling or even tripling a window's efficiency level.

4. Block the air leaks

Did you know that air infiltration is the number one reason for the low temperatures at your residence? However, air leaks are simple to handle as all you need to do is walk around with a smoke stick to  discover and block them. Getting door sweepers and caulking the doors and home windows is usually an easy trick to prevent cold air from making its way into your house.

5. A programmable thermostat would really come in handy

Since you want to keep the heating bill from eating into your bank account too much, it would be wise to spend money on a programmable thermostat that will turn the heating system on and off according to the desired interior temperature.

HVAC Water Damage

Unbeknownst to most, your HVAC system is a common source of water damage. The very mechanics of your own HVAC system produces condensation (water) that has the potential to escape from the HVAC system and into your house. The biggest risk of an HVAC leak is that the leak may not be detected immediately thus potentially exposing you and your family to mold, structural damage, and costly repairs.

The risk of mold is well known and well documented and it is a real concern to a healthy house. Should your HVAC leak into your structure, mold can be introduced into your HVAC system, which, in time, can germinate and be spread throughout the entire building so that your exposure is maximized. Water is classified in to three categories: categories one, two, and three which defines the level of contamination and precisely how to professionally address each water category.

In truth, albeit unfortunately, there is no practical or safe way for a layperson to remove mold or bacteria from an affected area as the technology, skill, and technique required is not common knowledge and is a skill of craft. While anyone can apply an antifungal and wipe a visibly effected area clean, such action can, and most likely will, aerosolize microscopic spores thereby spreading the risk opposed to eliminating it which is the primary reason for special care.

Mold, however, is the tip of the iceberg when it comes to HVAC water damage. An undetected leak could silently but relentlessly ravage the building from inside the walls thus destroying the building's core. In the real world, homeowners have no indication that their HVAC system is dripping until they find water coming out of a wall or hear a dripping sound that seems to be without source.

For reasons such as a lot of these, we recommend that you have your HVAC system inspected by a expert on a regular basis. Should the HVAC inspector inform you that there may be a leak or issues with mold then it would be prudent to call your local independent water damage restoration company for help.

While we honor the American Can-Do attitude and it's Do-it-Yourself philosophy, there are some cases that are beyond the scope and ability of a Do-it-Yourselfer... this is such a case. Only an independent, specialist water damage restoration company has the requisite education, experience, equipment, and certifications and licenses to safely and completely remove mold from your house and to return your house to its preloss and premold condition.

Warning signs of HVAC Ductwork Problems

HVAC ductwork issues can go unnoticed for a long time, but the efficiency of this air delivery system directly influences the performance of a home's air conditioner, central heater or heat pump.

A home's HVAC may be losing as much as 30 percent of its conditioned air as a result of faulty or leaky ducts. The HVAC system contains of a long, branching group of duct pipes that snake throughout a house, hidden behind walls, ceilings and floors, or in the attic, crawlspace or garage. Because the majority of this system is hidden, house owners can have a hard time visually assessing ductwork's condition. Further, even if the ducts were installed correctly, over time connections can loosen or ducts can incur damage.

Most often, ductwork problems require the help of a expert; however, house owners can use the list below to confirm their suspicion of problematic ducts:

* Uninsulated ducts - When a portion of the ductwork system travels through areas that do not have access to cooled or heated air, like an attic or garage, cool air moving through the ducts will succumb to the hotter attic air surrounding the duct pipes, a process called conduction. In the winter, heated air can cool off for the same reason. This ductwork problem, however, is easily remedied by insulating ducts.

* Damaged ducts - A variety of factors can lead to damaged ducts, such as connections breaking loose, human interference or poor installation methods. No matter the cause, if conditioned air leaks out of the ducts, the house owner will pay for it in terms of higher energy costs because of reduced efficiency of the HVAC system. Sealing ducts can remedy leaks, but seriously damaged ducts may require that the house owner replace a portion of the HVAC system's ductwork.

* Poor duct returns - A healthy, efficient ductwork system relies on a balanced supply of air sent into the house, along with a healthy amount of return air that moves back into the HVAC equipment. The return air portion of ductwork is particularly prone to problems such as a lack of adequate return grilles, and the HVAC system is prone to leakage too. Proper inspection will identify the root of ductwork problems. There must be an equal amount of return air to support the supply air ducts. For every 1 ton of a/c capacity there must be 400 cubic feet per minute of air volume available in both return air duct and supply air. So for example, a three ton a/c systems will need 1200 CFM of duct duct work in both supply and return air ducts.

For house owners experiencing hot or cold spots and restrictive air flow in their house should contact an HVAC qualified professional. They will perform a comprehensive ductwork inspection in the house, and will make any recommendations to improve the house owner's HVAC service.